How To Replace A Tent Zipper With Velcro

By Charles •  6 min read
How to replace a tent zipper with velcro featured image

Replacing a zipper on a tent can be a difficult and frustrating task. It often requires specialized tools and knowledge that not everyone has access to. However, there is an easy and affordable alternative that can be just as effective – using Velcro! In this article, we will show you how to replace a tent zipper with velcro.

Why Do Tents Use Zippers Anyway?

Zippers are the traditional way to keep tents closed since they can easily be opened and closed when necessary. They also provide a secure seal that keeps out the elements.

Why Replace Your Tent Zipper With Velcro?

For anyone who enjoys spending time outdoors, a tent is an essential piece of gear. However, even the best tents can have weak points, one of the most common being the zipper.

  • Zippers are prone to breaking and can be difficult to repair, making them frustrating at times.
  • Velcro, on the other hand, is much more durable and can be easily repaired in the field.
  • Velcro can be much quieter than a zipper.

For all these reasons, it is worth replacing a tent zipper with velcro. Not only will it save you time and hassle in the long run, but it will also help you to enjoy your time outdoors that much more.

Materials Needed:

  • Velcro in the appropriate size
  • Scissors
  • Sewing kit (optional) or fabric adhesive

Instructions:

Time needed: 1 hour and 30 minutes

Here are the steps you will need to replace a tent zipper with velcro.

  1. Remove the old zipper.

    Carefully cut through the stitching that holds the zipper in place. If there is any adhesive holding the zipper in place, you can gently heat it with a hair dryer to loosen it before carefully peeling it away.

  2. Cut a strip of velcro that is the same length as the old zipper.

    The velcro should be slightly narrower than the old zipper so that it can be sewn into place without bunching up the fabric.

  3. Sew the velcro strip into place.

    Start at one end of the strip and sew along the length of it, making sure that you catch both sides of the velcro in your stitches. Finish by knotting the thread securely or sewing on a makeshift fabric button at each end.

  4. Alternatively, glue the velcro in place.

    Use fabric glue or another strong adhesive to secure the velcro strip to the fabric. Be sure to press down firmly and evenly, then allow it time to dry completely before moving on.

  5. Test out your new closure!

    Close up the tent and make sure that the velcro is holding strong. If necessary, you can add more stitches along the length of the velcro to reinforce it. You should be good to go!

Congratulations – you have successfully replaced your tent zipper with velcro! Now you can enjoy the outdoors worry-free, knowing that your tent is secure and ready for anything. Have fun and stay safe out there!

Benefits of Replacing A Tent Zipper With Velcro

Replacing a tent zipper with velcro offers several advantages.

  • Firstly, it is more durable and can withstand heavy wear and tear better than a zipper.
  • Secondly, it is easier to repair in the field if something does go wrong.
  • Finally, it provides a much quieter closure than most zippers which helps to keep out any unwanted noise.
  • Overall, replacing your tent zipper with velcro is a great way to give your tent an extra level of protection and peace of mind.

The advice in this article will help you Replace a Tent Zipper with Velcro quickly and easily, giving you peace of mind when pitching your tent.

Reasons To Keep A Zipper On Your Tent

Although Velcro can offer many advantages over a zipper, there are still some reasons to keep your tent’s zipper intact. For one, it offers better protection against the elements. A zipper will always provide a tighter seal than velcro, which is important when camping in inclement weather.

Additionally, zippers are more secure than velcro, making it more difficult for thieves to break into your tent.

Additional Tips For Replacing The Zipper On Your Tent

tent zipper open looking over mountain
Photo by Mel Elías on Unsplash

I would like to add a few additional tips to make replacing your zipper easier.

  • Once you have replaced the zipper, be sure to check it regularly for signs of wear and tear. Replace any fraying or damaged velcro immediately so that your tent remains secure.
  • It is also a good idea to carry extra velcro in case of emergency repairs in the field.
  • Finally, make sure that you always store your tent in a dry place away from direct sunlight or wet conditions.

Following these tips will ensure that your tent remains secure and ready to use whenever you need it.

Final Thoughts

There are a few things to keep in mind when choosing between a zipper and velcro for your tent closure. First, consider how often you’ll need to open and close your tent. If you’re constantly going in and out, velcro might not be as practical because it can become unstuck more easily than a zipper.. Additionally, think about whether noise might be an issue – zippers can sometimes be noisy, which might not matter if you’re car camping but could be an issue if you’re hunting. And finally, take into consideration what kind of climate you’ll typically be camping in – tent zippers can sometimes rust in wet weather conditions, whereas velcro will hold up just fine. Ultimately, both options have their pros and cons, so it’s up to you to decide which will work best for your needs!

Frequently Asked Questions

Can tent zippers be replaced?

Yes, tent zippers can be replaced with velcro as an easy and affordable way to repair your tent.

Will velcro keep my tent secure?

Yes, velcro is a great option for keeping your tent secure. It’s more durable than traditional zippers and provides a quieter closure.

What else should I consider when replacing my zipper?

When replacing your zipper, consider how often you’ll need to open and close it, whether noise could be a concern, and what kind of climate you’ll typically be camping in.

How do you fix a zipper on a tent door?

To fix a zipper on a tent door, you’ll need to remove the old zipper and replace it with velcro.

How do you fix a tent zipper that came off the track?

To fix a tent zipper that came off the track, start by removing the old zipper. Replace it with velcro, making sure that the velcro is securely stitched on and strong.

Charles

Charles is a man who loves the outdoors. He moved to Wyoming specifically to spend more time in the mountains and wilderness. A hunter and fisherman, Charles knows how to enjoy nature and all that it has to offer. He is an outdoorsman through and through, and he wouldn't have it any other way. Charles is the President of Absaroka Enterprises, an company focuse on outdoor entertainment and endeavours. He's also an Editor for Alpha and Omega Outdoors, an online hunting, fishing, camping, trapping, and all around outdoors blog.

Keep Reading